Wausau Homes Blog
Get homebuilding advice, hear about current trends, and learn company news.
Blog Archives
14 ~ Simpson Strong-Tie SUR2.56/9 Joist Hangers – 2-1/2″ Skewed RH
July 22 2026
Shipping may be FedEx or ups or usps.
Simpson Strong-Tie SUR2.56/11 – 2-1/2 x 11-1/4 Joist Hanger Skewed Right 20 Pk
July 22 2026
The SUR/L are 45°-skewed hangers designed to support solid sawn and engineered wood products used in wood construction. These U-shaped hangers encapsulate the top flange of the joist, so no web stiffeners are required for standard installation. The SUR and SUL hangers are identical except that they are skewed 45° to the right (SUR) and the left (SUL), respectively. Key Features Features obround nail holes on the acute side, allowing nails to be easily installed parallel to the joist These hangers cannot be modified but will accommodate a 40° to 50° skewed joist Features positive-angle nailing for engineered wood sizes to prevent wood splitting and to speed installation Available with the A2 (acute) flange turned in to accommodate end-of-wall installation for solid sawn sizes only (SURC or SULC) Material 16 gauge Finish Galvanized. Some products available in ZMAX coating or stainless steel
Simpson Strong-Tie RPS18 1-1/2-Inch x 18-5/16-Inch Retro Plate Strap 50 Pk
July 21 2026
Simpson RPS22 meets IBC, IRC and City of Los Angeles code requirements for HVAC and pipes in walls. Finish Galvanized. Some products available in ZMAX coating
Simpson Strong-Tie RPS18Z 1-1/2-In x 18-5/16-In Retro Plate Strap ZMAX 50 Pk
July 21 2026
Simpson RPS22 meets IBC, IRC and City of Los Angeles code requirements for HVAC and pipes in walls. Finish Galvanized. Some products available in ZMAX coating
Simpson Strong-Tie MST48HDG 48-Inch Medium Strap Tie HDG 10 Pk
July 21 2026
The MST is designed to resist tension loads in floor-to-floor and other applications. This high-capacity strap features a dense nailing pattern and can be installed with either nails or bolts. The MST is a load-rated, precut strap designed for quick installation and optimal performance. It is suitable for connecting double 2x members or greater. Key Features Can be used in conjunction with embedded purlin anchor (PA) straps for additional length Designed to resist wind and seismic forces Finish Galvanized. Some products are available in stainless steel, ZMAX® coating or black powder coat
Simpson Strong-Tie ECCQ44SDS25 4 X 4 End Column Cap With Screws 4 Pk
July 21 2026
Column caps provide a strong connection for column-beam combinations. This design uses Strong-Drive® SDS Heavy-Duty Connector screws to provide faster installation and provides a greater net section area of the column compared to bolts. The SDS screws provide for a lower profile compared to standard through bolts. Material CCQ3, ECCQ3, CCQ4, CCQ4.62, ECCQ4, ECCQ4.62, CCQ6, ECCQ6 — 7 gauge; all others — 3 gauge Finish Simpson Strong-Tie gray paint; available in HDG and stainless steel; CCOQ and ECCOQ — no coating Installation Install 1/4″ x 2 1/2″ Strong-Drive SDS Heavy-Duty Connector screws, which are provided with the column cap. (Lag screws will not achieve the same load.) Install stainless-steel Strong-Drive screws with stainless-steel connectors. CCOQ and ECCOQ column caps only (no straps) may be ordered for field welding to pipe or other columns. Dimensions are same as CCQ and ECCQ. Weld by Designer. For rough-cut lumber sizes, provide dimensions. An optional W2 dimension may be specified with any column size given. (Note that the W2 dimension on straps rotated 90° is limited by the W1 dimension.) Options For end conditions, specify ECCQ. Straps may be rotated 90° where W1 ≥ W2 and for CCQ5-6. Other custom column caps are available. Contact Simpson Strong-Tie.
Simpson Strong-Tie RPS22 1-1/2-Inch x 22-5/16-Inch Retro Plate Strap 50 Pk
July 21 2026
Simpson RPS22 meets IBC, IRC and City of Los Angeles code requirements for HVAC and pipes in walls. Finish Galvanized. Some products available in ZMAX coating
(QTY 7) Simpson Strong-Tie RPS22 1-1/2 Inch x 22-5/16 Inch Retro Plate Strap
July 21 2026
Durable hinges and handles make every door and window operate smoothly long term.
Simpson Strong-Tie ECCQ66SDS25 6 X 6 End Column Cap With Screws 3 Pk
July 21 2026
Column caps provide a strong connection for column-beam combinations. This design uses Strong-Drive® SDS Heavy-Duty Connector screws to provide faster installation and provides a greater net section area of the column compared to bolts. The SDS screws provide for a lower profile compared to standard through bolts. Material CCQ3, ECCQ3, CCQ4, CCQ4.62, ECCQ4, ECCQ4.62, CCQ6, ECCQ6 — 7 gauge; all others — 3 gauge Finish Simpson Strong-Tie gray paint; available in HDG and stainless steel; CCOQ and ECCOQ — no coating Installation Install 1/4″ x 2 1/2″ Strong-Drive SDS Heavy-Duty Connector screws, which are provided with the column cap. (Lag screws will not achieve the same load.) Install stainless-steel Strong-Drive screws with stainless-steel connectors. CCOQ and ECCOQ column caps only (no straps) may be ordered for field welding to pipe or other columns. Dimensions are same as CCQ and ECCQ. Weld by Designer. For rough-cut lumber sizes, provide dimensions. An optional W2 dimension may be specified with any column size given. (Note that the W2 dimension on straps rotated 90° is limited by the W1 dimension.) Options For end conditions, specify ECCQ. Straps may be rotated 90° where W1 ≥ W2 and for CCQ5-6. Other custom column caps are available. Contact Simpson Strong-Tie.
Simpson Strong-Tie ECCQ5-4SDS2.5 End Column Cap 5-1/8″ Beam 4x Post w/SDS Screws
July 21 2026
Steel beams run through the walls, so the building holds up well in heavy rain.
Simpson Strong-Tie ECCQ5-4SDS2.5 END COLUMN CAP 5-1/8″ Beam 4x Post w/SDS Screws
July 21 2026
Crafted from durable heavy-gauge steel, this column cap is designed to provide column-to-beam connections in wood construction.
Simpson Strong-Tie ECCQ5-4SDS25 5 X 4 End Column Cap With Screws
July 21 2026
Column caps provide a strong connection for column-beam combinations. This design uses Strong-Drive® SDS Heavy-Duty Connector screws to provide faster installation and provides a greater net section area of the column compared to bolts. The SDS screws provide for a lower profile compared to standard through bolts. Material CCQ3, ECCQ3, CCQ4, CCQ4.62, ECCQ4, ECCQ4.62, CCQ6, ECCQ6 — 7 gauge; all others — 3 gauge Finish Simpson Strong-Tie gray paint; available in HDG and stainless steel; CCOQ and ECCOQ — no coating Installation Install 1/4″ x 2 1/2″ Strong-Drive SDS Heavy-Duty Connector screws, which are provided with the column cap. (Lag screws will not achieve the same load.) Install stainless-steel Strong-Drive screws with stainless-steel connectors. CCOQ and ECCOQ column caps only (no straps) may be ordered for field welding to pipe or other columns. Dimensions are same as CCQ and ECCQ. Weld by Designer. For rough-cut lumber sizes, provide dimensions. An optional W2 dimension may be specified with any column size given. (Note that the W2 dimension on straps rotated 90° is limited by the W1 dimension.) Options For end conditions, specify ECCQ. Straps may be rotated 90° where W1 ≥ W2 and for CCQ5-6. Other custom column caps are available. Contact Simpson Strong-Tie.
ZIP not found
Invalid ZIP format.
